Change language:

Search:

Back

4 of 8 (Overview)

Next

METEO-40 (S, M, L) incl. pre-assembled steel cabinet

by: Ammonit

Order No.: SW2036_9327.7

Shipping time 14 Workingday

€ 0

Prices plus
VAT plus Shipping rates & policies*

Model

Calibration

Optional accessory




Product information "METEO-40 (S, M, L) incl. pre-assembled steel cabinet"

Meteo-40 is available in three configurations - for every application the best suitable data logger. Meteo-40 is designed for high performance and accuracy working at a minimum of power. You can reliably supply a complete measurement system with only a 50 W solar module - even in remote sites under extreme weather conditions.

Each measurement system is designed according to your requirements including all meteorological sensors, communication and power supply system. Storage in a CE-certified steel cabinet protects the data logger against weather and condensation damage as well as theft and vandalism.

The Ammonit data logger is safely stored into a CE certified steel cabinet to protect it against weather and condensation damage, theft and vandalism. Several components are in the system included, such as a GSM/GPRS communication module, a barometric pressure sensor, a battery and solar power supply components.  (Panel not included)
The data transfer between your computer and the logger can be carried out via GSM/GPRS or direct interface.


The barometric pressure sensor is installed in the steel cabinet.

Meteo 40 S/M or L

  • Digital signature and encryption, e.g., measurement data and logbook files
  • Up to 2 GB memory, recording 1 sec. original measurement data
  • additional storage of aggregate data (min. 3 years)
  • Many channels:
    Meteo-40S, 11 channels
    Meteo-40M, 22 channels (optional for POTentiometric - or TMR wind vane)
    Meteo-40L, 35 channels
  • High resolution (~ 16bit, ~ 8Hz), symmetric, differential analog channels with various input ranges to choose from (± 0.1V, ± 1V, ± 10V)
  • High sensitivity analog input, e.g. temperature sensor Pt 100
  • Digital channel for smart sensors, e.g. Thies TMR wind vane
  • Data communication and exchange via HTTPS, FTP, SCP connection and email
  • 1 USB port for PC connection; 2 USB ports for modem and adapter:
    GSM, GPRS, CDMA, WiFi; 1 Ethernet port for LAN, router.
  • Data output: Ethernet, RS-485
  • Compatibility with SCADA systems
  • Integrated Linux system for maximum flexibility and adaptability
  • User-friendly web interface for configuration and controlling (no additional software needed)
  • Low energy consumption (50 W solar panel)
  • Reliable, flexible and user-friendly

Steel cabinet

  • CE certified, robust weatherproof steel casing
  • Material: powder coated steel sheet / IP 55
  • Easy to install and maintain components
  • Surge protection against weather-, condensation damage, vandalismus and theft
  • Door hinges: right, polyurethan-sealan

GSM/GPRS-System

  • Vatious modems are available
  • Data transfer via Mobile network: email, internet, FTP/SCP server
  • Automated mailing of e.g. the daily measuring data to your mail box
  • Requirements: GSM/GPRS-network

Magnet Foot Antenna

  • Reception in high density areas and mountain regions
  • Installation via magnet onto steel cabinet
  • GSM 890-960 MHz; UMTS 1710-2150 MHz
  • 3.5 m Cable FME(female)
  • Gain (890-960 MHz) 3dBi
  • Gain (1710-2150 MHz) 5dBi
  • Impendance: 50 Ohm
  • Height: 359 mm

Solar Controller Steca Solsum

  • System voltage 12 V (24V)
  • Current output: 6 A
  • Load current 6A
  • Temperature range: -25...50 °C
  • Size: 145 x 100 x 30 mm
  • Weight: approx. 150 g
  • Protection: IP 32

Barometric pressure sensor AB 60

Optional installation within a met-mast mounted steel cabinet

  • Piezoelectric barometric pressure sensor
  • Measuring range: 800...1100 hPa (mbar)
  • Voltage output: 0...5 VDC
  • Supply voltage: 9...32 VDC
  • Low energy consumption: <5 mA @ 12 VDC
  • Temperature range: -40...85 °C
  • Humidity range: 0...98 %RH
  • Atmosphere: non ionic, non corrosive
  • Response time 10 to 90 %, typ. 50 ms

Further information about "METEO-40 (S, M, L) incl. pre-assembled steel cabinet"

Available downloads:

Download Ammonit_Meteo-40_Data_Logger

Customer reviews for "METEO-40 (S, M, L) incl. pre-assembled steel cabinet"

Create a review

Create a review

Reviews will be released after verification.

Please fill in all required fields

Suggested Items

Meteo-40 (S, M or L) Meteo-40 (S, M or L)

from € 1695,00*

more

Order No.: SW2036_9327.7

Shipping time 14 Workingday

€ 0

Prices plus
VAT plus Shipping rates & policies*

ab € 3285,00

Prices plus
VAT + Shipping rates & policies*